CHINO Works America Inc. - Thermal Imaging - TP-U0260ES Unit Type Body Surface Temperature Checker

Thermo Imaging

TP-U0260ES Unit Type Body Surface Temperature Checker
TP-U is a body surface temperature measuring unit that installs 2000 pixels thermal imaging sensor. It quickly measures the body surface temperature and if detects the alarm point temperature (ex. 37.5°C) then the failure lamp lightens. Install at employee entrance, school entrance, crowded facilities, etc and simply check the fever.

TabView Example - Basic From Existing Markup

Measures body surface temperature just in 3 seconds.

Easy operation and self check by confirming standby, good and failure lamps.

Hygienic because non-contact measuring.

Prepared for stand-alone operation.

Exclusive application software.

Universal power supply, 100 to 240 VAC.

Auto Correct : Screening function provided.

Manual Correct : Manually set offset adjustment of measuring temperature.

Model	Specification
TP-U0260ES	Standard

Temp Range:	20 to 40°C
Accuracy rating:	±0.5°C at 37°C Ambient temperature 25°C)
Detector:	Thermopile array Approx. 2000 Pixel
Wavelength:	Center wavelength 10μm
Viewable Angle:	60°x 60°
Radius Resolution:	21.8mard
Frame Speed:	1Hz
Focus:	Fixed Focus
Communication Interface:	10BASE-T/100BASE-TX
Contact Output:	2 points, Non voltage contact output
Power Supply:	100 to 240 V AC (universal power supply)
Working Temp:	0 to 40°C
Working RH:	10 to 80% (No dew condensation)
Weight:	Approx. 0.7kg
Installation:	Wall mounting, desktop or tripod (Please prepare the tripod at your side)
Warm up time:	Approx. 60 minutes

1. Confirmation the orange lamp is lighting

Confirm that the unit is stand-by. Body surface temperature might change by the ambient temperature.

2. Measure body surface temperature

Lean your head to the sensor about 15 cm. Wait 3 seconds until it sounds "Be-Be-Beep".

3. Confirm the judgment result

Green lamp lightens when below the set alarm point (ex. 38°C) or red lamp blinks.

PS Sheet

TP-U series

PSE-706